文章目录

1. 🛠️ 基础环境配置

📌 安装基础环境请参考：
[Ubuntu 22.04] 安装K8S基础环境准备脚本

2. 🐳 Docker安装

📌 docker安装请参考：
[Ubuntu 22.04] 安装docker，并设置镜像加速

3. 🚢 部署Harbor，HTTP访问

📌 [Ubuntu 22.04] 安装Harbor#HTTP方式

🔍 浏览器中输入：http://192.168.11.20，即可访问刚才部署的harbor

4. 📦 部署ContainerD

📌 containerd的安装请参考：
[Ubuntu 22.04] 安装containerd

5. 🔄 修改docker配置文件，向harbor中推入镜像

🎯 目标：向第三步部署的harbor仓库中推入镜像仓库

根据目前的环境，有两种方式可以向harbor中推入镜像。其一是通过docker向harbor中推入镜像仓库。其二是通过containerd向harbor中推入镜像

由于目前我们对于containerd并不熟悉，因此我们先直接通过docker向harbor中推入镜像，由于我们自己搭建的harbor是私有仓库，并且是HTTP的方式，因此我们需要配置docker的配置文件。

你可以重新找一台机器安装docker做实验，或者直接使用harbor那台机器也可以，这里我直接使用harbor那台机器上的docker工具，向harbor推送镜像。

配置修改如下，主要是增加了insecure-registries配置，如果你的配置文件中包含其它的配置，请不要直接执行，否则会覆盖你的配置。；另外，请一定要注意80端口，这个不能省略，否则docker会以https的方式访问harbor

tee /etc/docker/daemon.json << 'EOF'
{
    "registry-mirrors": [
        "http://hub-mirror.c.163.com",
        "https://mirror.baidubce.com",
        "https://docker.mirrors.ustc.edu.cn",
        "https://registry.docker-cn.com",
        "https://dockerproxy.com",
        "https://ccr.ccs.tencentyun.com",
        "https://registry.cn-hangzhou.aliyuncs.com"
    ],
    "insecure-registries": ["192.168.11.20:80"]
}
EOF

systemctl restart docker.service

这里我随便推送harbor的一个镜像到我自己的harbor仓库当中，操作如下，第一步：重新打tag， 第二步：docker push。这里需要注意的是，再推送镜像之前，一定要在登录harbor，提前建立仓库目录，否则推送会被拒绝，另外，静态的Tag所指向的仓库端口必须要显式指定80端口，否则默认使用443端口

root@harbor-http:~/harbor#
root@harbor-http:~/harbor#
root@harbor-http:~/harbor# cat /etc/docker/daemon.json
{
    "registry-mirrors": [
        "http://hub-mirror.c.163.com",
        "https://mirror.baidubce.com",
        "https://docker.mirrors.ustc.edu.cn",
        "https://registry.docker-cn.com",
        "https://dockerproxy.com",
        "https://ccr.ccs.tencentyun.com",
        "https://registry.cn-hangzhou.aliyuncs.com"
    ],
    "insecure-registries": ["192.168.11.20:80","192.168.11.30"]
}
root@harbor-http:~/harbor# docker images
REPOSITORY                    TAG       IMAGE ID       CREATED        SIZE
goharbor/redis-photon         v2.8.2    6f4498a430ca   7 weeks ago    121MB
goharbor/harbor-registryctl   v2.8.2    fa61a236a6d6   7 weeks ago    142MB
goharbor/registry-photon      v2.8.2    f80e71363231   7 weeks ago    79.3MB
goharbor/nginx-photon         v2.8.2    3d009028f260   7 weeks ago    120MB
goharbor/harbor-log           v2.8.2    2914d282d9bf   7 weeks ago    127MB
goharbor/harbor-jobservice    v2.8.2    40118f1568a8   7 weeks ago    141MB
goharbor/harbor-core          v2.8.2    0bbbd1f379fc   7 weeks ago    165MB
goharbor/harbor-portal        v2.8.2    3e74e0758aa4   7 weeks ago    127MB
goharbor/harbor-db            v2.8.2    5126635ae9f0   7 weeks ago    174MB
goharbor/prepare              v2.8.2    eb3cf3cdd17a   7 weeks ago    163MB
hello-world                   latest    9c7a54a9a43c   2 months ago   13.3kB
root@harbor-http:~/harbor#
root@harbor-http:~/harbor# docker tag goharbor/harbor-core:v2.8.2 192.168.11.20:80/goharbor/harbor-core:v2.8.2
root@harbor-http:~/harbor#
root@harbor-http:~/harbor# docker login -u admin -p harbor666 192.168.11.20:80
WARNING! Using --password via the CLI is insecure. Use --password-stdin.
WARNING! Your password will be stored unencrypted in /root/.docker/config.json.
Configure a credential helper to remove this warning. See
https://docs.docker.com/engine/reference/commandline/login/#credentials-store

Login Succeeded
root@harbor-http:~/harbor#
root@harbor-http:~/harbor# docker push 192.168.11.20:80/goharbor/harbor-core:v2.8.2
The push refers to repository [192.168.11.20:80/goharbor/harbor-core]
c8ec2ddada08: Pushed
e1c4f1102d2f: Pushed
17583ba2a843: Pushed
0a049ad6bb06: Pushed
557ccce847e1: Pushed
9cb5dd968a55: Pushed
06d8a79a810a: Pushed
88edeb5b4944: Pushed
c00acf6f4f58: Pushed
21e7914e06fb: Pushed
v2.8.2: digest: sha256:654efa193924544a680f1cc7aaadb8d9fb4e1dcaa8c84a74c71b7fe861973838 size: 2411
root@harbor-http:~/harbor#
root@harbor-http:~/harbor# docker images
REPOSITORY                              TAG       IMAGE ID       CREATED        SIZE
goharbor/redis-photon                   v2.8.2    6f4498a430ca   7 weeks ago    121MB
goharbor/harbor-registryctl             v2.8.2    fa61a236a6d6   7 weeks ago    142MB
goharbor/registry-photon                v2.8.2    f80e71363231   7 weeks ago    79.3MB
goharbor/nginx-photon                   v2.8.2    3d009028f260   7 weeks ago    120MB
goharbor/harbor-log                     v2.8.2    2914d282d9bf   7 weeks ago    127MB
goharbor/harbor-jobservice              v2.8.2    40118f1568a8   7 weeks ago    141MB
192.168.11.20:80/goharbor/harbor-core   v2.8.2    0bbbd1f379fc   7 weeks ago    165MB
goharbor/harbor-core                    v2.8.2    0bbbd1f379fc   7 weeks ago    165MB
goharbor/harbor-portal                  v2.8.2    3e74e0758aa4   7 weeks ago    127MB
goharbor/harbor-db                      v2.8.2    5126635ae9f0   7 weeks ago    174MB
goharbor/prepare                        v2.8.2    eb3cf3cdd17a   7 weeks ago    163MB
hello-world                             latest    9c7a54a9a43c   2 months ago   13.3kB
root@harbor-http:~/harbor#

6. 配置containerd

mkdir -p /etc/containerd/certs.d/192.168.11.20:80
tee /etc/containerd/certs.d/192.168.11.20:80/hosts.toml << 'EOF'
server = "http://192.168.11.20:80"

[host."http://192.168.11.20:80"]
  capabilities = ["pull", "resolve", "push"]
  skip_verify = true
EOF

systemctl restart containerd.service
6.1. 拉取镜像验证

执行：ctr image pull --plain-http=true 192.168.11.20:80/goharbor/harbor-core:v2.8.2

root@containerd:~#
root@containerd:~# ctr image ls -q
docker.io/library/redis:alpine
root@containerd:~# cat /etc/containerd/certs.d/192.168.11.20\:80/hosts.toml
server = "http://192.168.11.20:80"

[host."http://192.168.11.20:80"]
  capabilities = ["pull", "resolve", "push"]
  skip_verify = true
root@containerd:~#
root@containerd:~#
root@containerd:~# ctr image pull --plain-http=true  192.168.11.20:80/goharbor/harbor-core:v2.8.2
192.168.11.20:80/goharbor/harbor-core:v2.8.2:                                     resolved       |++++++++++++++++++++++++++++++++++++++|
manifest-sha256:654efa193924544a680f1cc7aaadb8d9fb4e1dcaa8c84a74c71b7fe861973838: done           |++++++++++++++++++++++++++++++++++++++|
layer-sha256:aea1be403dd1c4dce59794761f350e4706eb70771631535689e2b06a0a241001:    done           |++++++++++++++++++++++++++++++++++++++|
layer-sha256:548383ab94bf8b81b55cabf36298e0b14cca610a07a1ebd5bba013fa61ffab96:    done           |++++++++++++++++++++++++++++++++++++++|
layer-sha256:06212d50621c9654d97e7ec78e972b5017e139b11763375ee4c28bace1fcc087:    done           |++++++++++++++++++++++++++++++++++++++|
layer-sha256:cf14510ec51c323f283e583a5aabfa33337680e953b07d83162a6c5b5d72defc:    done           |++++++++++++++++++++++++++++++++++++++|
layer-sha256:b6c3d89688aed77dcbea624088f7613ac0923ca1f0398c42f0c79503a03baed6:    done           |++++++++++++++++++++++++++++++++++++++|
config-sha256:0bbbd1f379fc1f577c5db15c9deac4a218637e4af0196d97e6771f59d9815355:   done           |++++++++++++++++++++++++++++++++++++++|
layer-sha256:b3381433ebd4d04b664639ab510a6659fec0268dc222de8fb085da676f017cb4:    done           |++++++++++++++++++++++++++++++++++++++|
layer-sha256:b70a76c262e454573e9550cb64962b84a338d78d6f1db4ee9464cce0a8a47dcd:    done           |++++++++++++++++++++++++++++++++++++++|
layer-sha256:378fedafb8051764d80ec29260e7bf3101aabe84b72b23c5829deb2a445391a8:    done           |++++++++++++++++++++++++++++++++++++++|
layer-sha256:f9cd03857d3ab614d97d896de3496a66dffaf4cf5b2051cda730d028d6def94e:    done           |++++++++++++++++++++++++++++++++++++++|
layer-sha256:a3c670ddffbdf7be0c56baae8213258ee6cf339929c86b29905dd11808c80a34:    done           |++++++++++++++++++++++++++++++++++++++|
elapsed: 0.5 s                                                                    total:  47.1 M (94.2 MiB/s)
unpacking linux/amd64 sha256:654efa193924544a680f1cc7aaadb8d9fb4e1dcaa8c84a74c71b7fe861973838...
done: 1.256989921s
root@containerd:~#
root@containerd:~#
root@containerd:~# ctr image ls -q
192.168.11.20:80/goharbor/harbor-core:v2.8.2
docker.io/library/redis:alpine
root@containerd:~#
6.2. 推送镜像验证

执行：ctr image push --plain-http=true -u admin:harbor666 192.168.11.20:80/goharbor/harbor-core:v2.8.3

root@containerd:~#
root@containerd:~# ctr image ls -q
192.168.11.20:80/goharbor/harbor-core:v2.8.2
docker.io/library/redis:alpine
root@containerd:~#
root@containerd:~# ctr image tag  192.168.11.20:80/goharbor/harbor-core:v2.8.2 192.168.11.20:80/goharbor/harbor-core:v2.8.3
192.168.11.20:80/goharbor/harbor-core:v2.8.3
root@containerd:~# ctr image ls -q
192.168.11.20:80/goharbor/harbor-core:v2.8.2
192.168.11.20:80/goharbor/harbor-core:v2.8.3
docker.io/library/redis:alpine
root@containerd:~#
root@containerd:~# ctr image push --plain-http=true -u admin:harbor666  192.168.11.20:80/goharbor/harbor-core:v2.8.3
manifest-sha256:654efa193924544a680f1cc7aaadb8d9fb4e1dcaa8c84a74c71b7fe861973838: done           |++++++++++++++++++++++++++++++++++++++|
config-sha256:0bbbd1f379fc1f577c5db15c9deac4a218637e4af0196d97e6771f59d9815355:   done           |++++++++++++++++++++++++++++++++++++++|
elapsed: 0.2 s                                                                    total:  7.7 Ki (38.4 KiB/s)
root@containerd:~#
root@containerd:~#

# http # 网络协议 # 网络
GitHub 加速计划 / co / containerd
16.89 K
3.34 K
下载
containerd 是一个容器运行时和镜像生成工具，用于管理容器化应用程序的生命周期管理。 * 容器化应用程序管理、容器运行时和编排工具 * 有什么特点：容器管理工具、支持多种容器化应用程序管理和部署工具、易于使用和集成
最近提交(Master分支：2 个月前 )
a4579956 Fix runtimeoptions location in v2 migration script 7 天前
66f72902 Revert "Disable vagrant strict dependency checking" 8 天前
Logo
GitCode 开源社区

旨在为数千万中国开发者提供一个无缝且高效的云端环境，以支持学习、使用和贡献开源项目。

更多推荐

[转载]在Windows环境下安装GNU Radio

转自：在Windows环境下安装GNURadio_恐弱智_新浪博客GNU Radio是用Python开发的，大部分开源的工程能够在Linux环境下运行良好，而Windows下却运行的很勉强，而且安装配置都很复杂。GNU Radio算是个例外了，不光提供了Windows的二进制安装，还有比较详细的说明。我是Python小白，所以折腾了好久才弄好，特意记录下来，免得以后再装还折腾。GNU Radio的

avatar GitCode 开源社区

centOS 8 使用dnf安装Docker

DNF是什么？CentOS 8使用YUM软件包管理器版本v4.0.4。现在，该版本使用DNF(已删除YUM)。DNF是软件包管理器。它会在Linux发行版上安装，执行更新并删除软件包。使用DNF安装Docker跳过具有损坏依赖性的程序包一个有效的解决方案是使您的CentOS 8系统使用以下--nobest命令安装最符合条件的版本：sudo dnf install docker...

avatar GitCode 开源社区

定时同步数据库表(mysql+linux+crontab)

sync.sh里面的参数需要改变，ip/username/password/database/tablesync.sh#!/bin/sh# Please change the IP and password of the data source db.# Then change the table name.filename=/home/nington/db/$(date +%Y-%m

avatar GitCode 开源社区