一、建表语句

MySQL转Oracle

--
-- XXL-JOB v2.2.0  Oracle建表语句
-- Meng
-- 基于v2.2.0 MySQL脚本修改的Oracle版本

CREATE TABLE xxl_job_info (
      id number(11) NOT NULL primary key,
      job_group number(11) NOT NULL,
      job_cron varchar(128) NOT NULL,
      job_desc varchar2(255) NOT NULL,
      add_time timestamp DEFAULT NULL,
      update_time timestamp DEFAULT NULL,
      author varchar2(64) DEFAULT NULL,
      alarm_email varchar2(255) DEFAULT NULL,
      executor_route_strategy varchar2(50) DEFAULT NULL,
      executor_handler varchar2(255) DEFAULT NULL,
      executor_param varchar2(512) DEFAULT NULL,
      executor_block_strategy varchar2(50) DEFAULT NULL,
      executor_timeout number(11) DEFAULT '0' NOT NULL,
      executor_fail_retry_count number(11) DEFAULT '0' NOT NULL,
      glue_type varchar2(50) NOT NULL,
      glue_source clob,
      glue_remark varchar2(128) DEFAULT NULL,
      glue_updatetime timestamp DEFAULT NULL,
      child_jobid varchar2(255) DEFAULT NULL,
      trigger_status number(4) DEFAULT '0' NOT NULL,
      trigger_last_time number(13) DEFAULT '0' NOT NULL,
      trigger_next_time number(13) DEFAULT '0' NOT NULL
);
comment on column xxl_job_info.job_group is '执行器主键ID';
comment on column xxl_job_info.author is '作者';
comment on column xxl_job_info.job_cron is '任务执行CRON';
comment on column xxl_job_info.alarm_email is '报警邮件';
comment on column xxl_job_info.executor_route_strategy is '执行器路由策略';
comment on column xxl_job_info.executor_handler is '执行器任务handler';
comment on column xxl_job_info.executor_param is '执行器任务参数';
comment on column xxl_job_info.executor_block_strategy is '阻塞处理策略';
comment on column xxl_job_info.executor_timeout is '任务执行超时时间，单位秒';
comment on column xxl_job_info.executor_fail_retry_count is '失败重试次数';
comment on column xxl_job_info.glue_type is 'GLUE类型';
comment on column xxl_job_info.glue_source is 'GLUE源代码';
comment on column xxl_job_info.glue_remark is 'GLUE备注';
comment on column xxl_job_info.glue_updatetime is 'GLUE更新时间';
comment on column xxl_job_info.child_jobid is '子任务ID，多个逗号分隔';
comment on column xxl_job_info.trigger_status is '调度状态：0-停止，1-运行';
comment on column xxl_job_info.trigger_last_time is '上次调度时间';
comment on column xxl_job_info.trigger_next_time is '下次调度时间';
CREATE SEQUENCE XXL_JOB_INFO_SEQ MINVALUE 1 MAXVALUE 99999999999999999999 INCREMENT BY 1 START WITH 1000 NOCACHE;

CREATE TABLE xxl_job_log (
     id number(20) NOT NULL primary key,
     job_group number(11) NOT NULL,
     job_id number(11) NOT NULL,
     executor_address varchar2(255) DEFAULT NULL,
     executor_handler varchar2(255) DEFAULT NULL,
     executor_param varchar2(512) DEFAULT NULL,
     executor_sharding_param varchar2(20) DEFAULT NULL,
     executor_fail_retry_count number(11) DEFAULT '0' NOT NULL,
     trigger_time timestamp DEFAULT NULL,
     trigger_code number(11) NOT NULL,
     trigger_msg varchar2(3000),
     handle_time timestamp DEFAULT NULL,
     handle_code number(11) NOT NULL,
     handle_msg varchar2(1000),
     alarm_status number(4) DEFAULT '0' NOT NULL
);
comment on column xxl_job_log.job_group is '执行器主键ID';
comment on column xxl_job_log.job_id is '任务，主键ID';
comment on column xxl_job_log.executor_address is '执行器地址，本次执行的地址';
comment on column xxl_job_log.executor_handler is '执行器任务handler';
comment on column xxl_job_log.executor_param is '执行器任务参数';
comment on column xxl_job_log.executor_sharding_param is '执行器任务分片参数，格式如 1/2';
comment on column xxl_job_log.executor_fail_retry_count is '失败重试次数';
comment on column xxl_job_log.trigger_time is '调度-时间';
comment on column xxl_job_log.trigger_code is '调度-结果';
comment on column xxl_job_log.trigger_msg is '调度-日志';
comment on column xxl_job_log.handle_time is '执行-时间';
comment on column xxl_job_log.handle_code is '执行-状态';
comment on column xxl_job_log.handle_msg is '执行-日志';
comment on column xxl_job_log.alarm_status is '告警状态：0-默认、1-无需告警、2-告警成功、3-告警失败';
CREATE SEQUENCE XXL_JOB_LOG_SEQ MINVALUE 1 MAXVALUE 99999999999999999999 INCREMENT BY 1 START WITH 1000 NOCACHE;
CREATE INDEX "I_TRIGGER_TIME" ON "XXL_JOB_LOG" ("TRIGGER_TIME");
CREATE INDEX "I_HANDLE_CODE" ON "XXL_JOB_LOG" ("HANDLE_CODE");

CREATE TABLE xxl_job_log_report (
    id number(11) NOT NULL primary key,
    trigger_day timestamp DEFAULT NULL,
    running_count number(11) DEFAULT '0' NOT NULL,
    suc_count number(11) DEFAULT '0' NOT NULL,
    fail_count number(11) DEFAULT '0' NOT NULL
);
comment on column xxl_job_log_report.trigger_day is '调度-时间';
comment on column xxl_job_log_report.running_count is '运行中-日志数量';
comment on column xxl_job_log_report.suc_count is '执行成功-日志数量';
comment on column xxl_job_log_report.fail_count is '执行失败-日志数量';
CREATE SEQUENCE XXL_JOB_REPORT_SEQ MINVALUE 1 MAXVALUE 99999999999999999999 INCREMENT BY 1 START WITH 1000 NOCACHE;
CREATE UNIQUE INDEX "I_TRIGGER_DAY" ON "XXL_JOB_LOG_REPORT" ("TRIGGER_DAY");

CREATE TABLE xxl_job_logglue (
     id number(11) NOT NULL primary key,
     job_id number(11) NOT NULL,
     glue_type varchar2(50) DEFAULT NULL,
     glue_source clob,
     glue_remark varchar2(128) NOT NULL,
     add_time timestamp DEFAULT NULL,
     update_time timestamp DEFAULT NULL
);
comment on column xxl_job_logglue.job_id is '任务，主键ID';
comment on column xxl_job_logglue.glue_type is 'GLUE类型';
comment on column xxl_job_logglue.glue_source is 'GLUE源代码';
comment on column xxl_job_logglue.glue_remark is 'GLUE备注';
CREATE SEQUENCE XXL_JOB_LOGGLUE_SEQ MINVALUE 1 MAXVALUE 99999999999999999999 INCREMENT BY 1 START WITH 1000 NOCACHE;

CREATE TABLE xxl_job_registry (
      id number(11) NOT NULL primary key,
      registry_group varchar2(50) NOT NULL,
      registry_key varchar2(255) NOT NULL,
      registry_value varchar2(255) NOT NULL,
      update_time timestamp DEFAULT NULL
);
CREATE SEQUENCE XXL_JOB_REGISTRY_SEQ MINVALUE 1 MAXVALUE 99999999999999999999 INCREMENT BY 1 START WITH 1000 NOCACHE;
CREATE INDEX "I_G_K_V" ON "XXL_JOB_REGISTRY" ("REGISTRY_GROUP", "REGISTRY_KEY", "REGISTRY_VALUE");

CREATE TABLE xxl_job_group (
       id number(11) NOT NULL primary key,
       app_name varchar2(64) NOT NULL,
       title varchar2(12) NOT NULL,
       address_type number(4) DEFAULT '0' NOT NULL,
       address_list varchar2(100)
);
comment on column xxl_job_group.app_name is '执行器AppName';
comment on column xxl_job_group.title is '执行器名称';
comment on column xxl_job_group.address_type is '执行器地址类型：0=自动注册、1=手动录入';
comment on column xxl_job_group.address_list is '执行器地址列表，多地址逗号分隔';
CREATE SEQUENCE XXL_JOB_GROUP_SEQ MINVALUE 1 MAXVALUE 99999999999999999999 INCREMENT BY 1 START WITH 1000 NOCACHE;

CREATE TABLE xxl_job_user (
      id number(11) NOT NULL primary key,
      username varchar2(50) NOT NULL,
      password varchar2(50) NOT NULL,
      role number(4) NOT NULL,
      permission varchar2(255) DEFAULT NULL
);
comment on column xxl_job_user.username is '账号';
comment on column xxl_job_user.password is '密码';
comment on column xxl_job_user.role is '角色：0-普通用户、1-管理员';
comment on column xxl_job_user.permission is '权限：执行器ID列表，多个逗号分割';
CREATE SEQUENCE XXL_JOB_USER_SEQ MINVALUE 1 MAXVALUE 99999999999999999999 INCREMENT BY 1 START WITH 1000 NOCACHE;
CREATE UNIQUE INDEX "I_USERNAME" ON "XXL_JOB_USER" ("USERNAME");

CREATE TABLE xxl_job_lock (
    lock_name varchar2(50) NOT NULL primary key
);
comment on column xxl_job_lock.lock_name is '锁名称';

comment on table xxl_job_lock is '任务调度锁表';
comment on table xxl_job_group is '执行器信息表';
comment on table xxl_job_info is '调度扩展信息表';
comment on table xxl_job_log is '调度日志表';
comment on table xxl_job_log_report is '调度日志报表';
comment on table xxl_job_logglue is '任务GLUE日志';
comment on table xxl_job_registry is '执行器注册表';
comment on table xxl_job_user is '系统用户表';

INSERT INTO XXL_JOB_GROUP (id,app_name,title,address_type,address_list) VALUES (1,'xxl-job-executor-sample','示例执行器',0,NULL);
INSERT INTO xxl_job_info(id, job_group, job_cron, job_desc, add_time, update_time, author, alarm_email, executor_route_strategy, executor_handler, executor_param, executor_block_strategy, executor_timeout, executor_fail_retry_count, glue_type, glue_source, glue_remark, glue_updatetime, child_jobid) VALUES (1, 1, '0 0 0 * * ? *', '测试任务1', to_date('2018-11-03 22:21:31','YYYY-MM-DD hh24:mi:ss'), to_date('2018-11-03 22:21:31','YYYY-MM-DD hh24:mi:ss'), 'XXL', '', 'FIRST', 'demoJobHandler', '', 'SERIAL_EXECUTION', 0, 0, 'BEAN', '', 'GLUE代码初始化', to_date('2018-11-03 22:21:31','YYYY-MM-DD hh24:mi:ss'), '');
INSERT INTO xxl_job_user(id, username, password, role, permission) VALUES (1, 'admin', 'e10adc3949ba59abbe56e057f20f883e', 1, NULL);
INSERT INTO xxl_job_lock ( lock_name) VALUES ( 'schedule_lock');

再放一份2.3.1版本的

--
-- XXL-JOB v2.3.1
-- Meng
-- 基于v2.3.1 MySQL脚本修改的Oracle脚本

CREATE TABLE xxl_job_info (
      id number(11) NOT NULL primary key,
      job_group number(11) NOT NULL,
      job_desc varchar2(255) NOT NULL,
      add_time timestamp DEFAULT NULL,
      update_time timestamp DEFAULT NULL,
      author varchar2(64) DEFAULT NULL,
      alarm_email varchar2(255) DEFAULT NULL,
      schedule_type varchar2(50) DEFAULT 'NONE' NOT NULL,
      schedule_conf varchar2(128) DEFAULT NULL,
      misfire_strategy varchar2(50) DEFAULT 'DO_NOTHING' NOT NULL,
      executor_route_strategy varchar2(50) DEFAULT NULL,
      executor_handler varchar2(255) DEFAULT NULL,
      executor_param varchar2(512) DEFAULT NULL,
      executor_block_strategy varchar2(50) DEFAULT NULL,
      executor_timeout number(11) DEFAULT '0' NOT NULL,
      executor_fail_retry_count number(11) DEFAULT '0' NOT NULL,
      glue_type varchar2(50) NOT NULL,
      glue_source clob,
      glue_remark varchar2(128) DEFAULT NULL,
      glue_updatetime timestamp DEFAULT NULL,
      child_jobid varchar2(255) DEFAULT NULL,
      trigger_status number(4) DEFAULT '0' NOT NULL,
      trigger_last_time number(13) DEFAULT '0' NOT NULL,
      trigger_next_time number(13) DEFAULT '0' NOT NULL
);
comment on column xxl_job_info.job_group is '执行器主键ID';
comment on column xxl_job_info.author is '作者';
comment on column xxl_job_info.alarm_email is '报警邮件';
comment on column xxl_job_info.schedule_type is '调度类型';
comment on column xxl_job_info.schedule_conf is '调度配置，值含义取决于调度类型';
comment on column xxl_job_info.misfire_strategy is '调度过期策略';
comment on column xxl_job_info.executor_route_strategy is '执行器路由策略';
comment on column xxl_job_info.executor_handler is '执行器任务handler';
comment on column xxl_job_info.executor_param is '执行器任务参数';
comment on column xxl_job_info.executor_block_strategy is '阻塞处理策略';
comment on column xxl_job_info.executor_timeout is '任务执行超时时间，单位秒';
comment on column xxl_job_info.executor_fail_retry_count is '失败重试次数';
comment on column xxl_job_info.glue_type is 'GLUE类型';
comment on column xxl_job_info.glue_source is 'GLUE源代码';
comment on column xxl_job_info.glue_remark is 'GLUE备注';
comment on column xxl_job_info.glue_updatetime is 'GLUE更新时间';
comment on column xxl_job_info.child_jobid is '子任务ID，多个逗号分隔';
comment on column xxl_job_info.trigger_status is '调度状态：0-停止，1-运行';
comment on column xxl_job_info.trigger_last_time is '上次调度时间';
comment on column xxl_job_info.trigger_next_time is '下次调度时间';

CREATE TABLE xxl_job_log (
     id number(20) NOT NULL primary key,
     job_group number(11) NOT NULL,
     job_id number(11) NOT NULL,
     executor_address varchar2(255) DEFAULT NULL,
     executor_handler varchar2(255) DEFAULT NULL,
     executor_param varchar2(512) DEFAULT NULL,
     executor_sharding_param varchar2(20) DEFAULT NULL,
     executor_fail_retry_count number(11) DEFAULT '0' NOT NULL,
     trigger_time timestamp DEFAULT NULL,
     trigger_code number(11) NOT NULL,
     trigger_msg varchar2(1000),
     handle_time timestamp DEFAULT NULL,
     handle_code number(11) NOT NULL,
     handle_msg varchar2(1000),
     alarm_status number(4) DEFAULT '0' NOT NULL
);
comment on column xxl_job_log.job_group is '执行器主键ID';
comment on column xxl_job_log.job_id is '任务，主键ID';
comment on column xxl_job_log.executor_address is '执行器地址，本次执行的地址';
comment on column xxl_job_log.executor_handler is '执行器任务handler';
comment on column xxl_job_log.executor_param is '执行器任务参数';
comment on column xxl_job_log.executor_sharding_param is '执行器任务分片参数，格式如 1/2';
comment on column xxl_job_log.executor_fail_retry_count is '失败重试次数';
comment on column xxl_job_log.trigger_time is '调度-时间';
comment on column xxl_job_log.trigger_code is '调度-结果';
comment on column xxl_job_log.trigger_msg is '调度-日志';
comment on column xxl_job_log.handle_time is '执行-时间';
comment on column xxl_job_log.handle_code is '执行-状态';
comment on column xxl_job_log.handle_msg is '执行-日志';
comment on column xxl_job_log.alarm_status is '告警状态：0-默认、1-无需告警、2-告警成功、3-告警失败';

CREATE TABLE xxl_job_log_report (
    id number(11) NOT NULL primary key,
    trigger_day timestamp DEFAULT NULL,
    running_count number(11) DEFAULT '0' NOT NULL,
    suc_count number(11) DEFAULT '0' NOT NULL,
    fail_count number(11) DEFAULT '0' NOT NULL,
    update_time timestamp DEFAULT NULL
);
comment on column xxl_job_log_report.trigger_day is '调度-时间';
comment on column xxl_job_log_report.running_count is '运行中-日志数量';
comment on column xxl_job_log_report.suc_count is '执行成功-日志数量';
comment on column xxl_job_log_report.fail_count is '执行失败-日志数量';

CREATE TABLE xxl_job_logglue (
     id number(11) NOT NULL primary key,
     job_id number(11) NOT NULL,
     glue_type varchar2(50) DEFAULT NULL,
     glue_source clob,
     glue_remark varchar2(128) NOT NULL,
     add_time timestamp DEFAULT NULL,
     update_time timestamp DEFAULT NULL
);
comment on column xxl_job_logglue.job_id is '任务，主键ID';
comment on column xxl_job_logglue.glue_type is 'GLUE类型';
comment on column xxl_job_logglue.glue_source is 'GLUE源代码';
comment on column xxl_job_logglue.glue_remark is 'GLUE备注';

CREATE TABLE xxl_job_registry (
      id number(11) NOT NULL primary key,
      registry_group varchar2(50) NOT NULL,
      registry_key varchar2(255) NOT NULL,
      registry_value varchar2(255) NOT NULL,
      update_time timestamp DEFAULT NULL
);

CREATE TABLE xxl_job_group (
       id number(11) NOT NULL primary key,
       app_name varchar2(64) NOT NULL,
       title varchar2(12) NOT NULL,
       address_type number(4) DEFAULT '0' NOT NULL,
       address_list varchar2(100),
       update_time timestamp DEFAULT NULL
);
comment on column xxl_job_group.app_name is '执行器AppName';
comment on column xxl_job_group.title is '执行器名称';
comment on column xxl_job_group.address_type is '执行器地址类型：0=自动注册、1=手动录入';
comment on column xxl_job_group.address_list is '执行器地址列表，多地址逗号分隔';

CREATE TABLE xxl_job_user (
      id number(11) NOT NULL primary key,
      username varchar2(50) NOT NULL,
      password varchar2(50) NOT NULL,
      role number(4) NOT NULL,
      permission varchar2(255) DEFAULT NULL
);
comment on column xxl_job_user.username is '账号';
comment on column xxl_job_user.password is '密码';
comment on column xxl_job_user.role is '角色：0-普通用户、1-管理员';
comment on column xxl_job_user.permission is '权限：执行器ID列表，多个逗号分割';

CREATE TABLE xxl_job_lock (
    lock_name varchar2(50) NOT NULL primary key
);
comment on column xxl_job_lock.lock_name is '锁名称';

comment on table xxl_job_lock is '任务调度锁表';
comment on table xxl_job_group is '执行器信息表';
comment on table xxl_job_info is '调度扩展信息表';
comment on table xxl_job_log is '调度日志表';
comment on table xxl_job_log_report is '调度日志报表';
comment on table xxl_job_logglue is '任务GLUE日志';
comment on table xxl_job_registry is '执行器注册表';
comment on table xxl_job_user is '系统用户表';

CREATE SEQUENCE XXL_JOB_GROUP_SEQ MINVALUE 1 MAXVALUE 99999999999999999999 INCREMENT BY 1 START WITH 1000 NOCACHE;
CREATE SEQUENCE XXL_JOB_INFO_SEQ MINVALUE 1 MAXVALUE 99999999999999999999 INCREMENT BY 1 START WITH 1000 NOCACHE;
CREATE SEQUENCE XXL_JOB_LOG_SEQ MINVALUE 1 MAXVALUE 99999999999999999999 INCREMENT BY 1 START WITH 1000 NOCACHE;
CREATE SEQUENCE XXL_JOB_REPORT_SEQ MINVALUE 1 MAXVALUE 99999999999999999999 INCREMENT BY 1 START WITH 1000 NOCACHE;
CREATE SEQUENCE XXL_JOB_LOGGLUE_SEQ MINVALUE 1 MAXVALUE 99999999999999999999 INCREMENT BY 1 START WITH 1000 NOCACHE;
CREATE SEQUENCE XXL_JOB_REGISTRY_SEQ MINVALUE 1 MAXVALUE 99999999999999999999 INCREMENT BY 1 START WITH 1000 NOCACHE;
CREATE SEQUENCE XXL_JOB_USER_SEQ MINVALUE 1 MAXVALUE 99999999999999999999 INCREMENT BY 1 START WITH 1000 NOCACHE;
CREATE SEQUENCE XXL_JOB_LOG_REPORT_SEQ MINVALUE 1 MAXVALUE 99999999999999999999 INCREMENT BY 1 START WITH 1000 NOCACHE;


INSERT INTO xxl_job_group(id, app_name, title, address_type, address_list, update_time) VALUES (1, 'xxl-job-executor-sample', '示例执行器', 0, NULL, '2018-11-03 22:21:31' );
INSERT INTO xxl_job_info(id, job_group, job_desc, add_time, update_time, author, alarm_email, schedule_type, schedule_conf, misfire_strategy, executor_route_strategy, executor_handler, executor_param, executor_block_strategy, executor_timeout, executor_fail_retry_count, glue_type, glue_source, glue_remark, glue_updatetime, child_jobid) VALUES (1, 1, '测试任务1', '2018-11-03 22:21:31', '2018-11-03 22:21:31', 'XXL', '', 'CRON', '0 0 0 * * ? *', 'DO_NOTHING', 'FIRST', 'demoJobHandler', '', 'SERIAL_EXECUTION', 0, 0, 'BEAN', '', 'GLUE代码初始化', '2018-11-03 22:21:31', '');
INSERT INTO xxl_job_user(id, username, password, role, permission) VALUES (1, 'admin', 'e10adc3949ba59abbe56e057f20f883e', 1, NULL);
INSERT INTO xxl_job_lock (lock_name) VALUES ( 'schedule_lock');
# oracle # 数据库
GitHub 加速计划 / xx / xxl-job
27.16 K
10.79 K
下载
xxl-job: 是一个分布式任务调度平台，核心设计目标是开发迅速、学习简单、轻量级、易扩展。
最近提交(Master分支：3 个月前 )
e5d26ba2 - 3 个月前
977ad87b - 4 个月前
Logo
GitCode 开源社区

旨在为数千万中国开发者提供一个无缝且高效的云端环境，以支持学习、使用和贡献开源项目。

更多推荐

[转载]在Windows环境下安装GNU Radio

转自：在Windows环境下安装GNURadio_恐弱智_新浪博客GNU Radio是用Python开发的，大部分开源的工程能够在Linux环境下运行良好，而Windows下却运行的很勉强，而且安装配置都很复杂。GNU Radio算是个例外了，不光提供了Windows的二进制安装，还有比较详细的说明。我是Python小白，所以折腾了好久才弄好，特意记录下来，免得以后再装还折腾。GNU Radio的

avatar GitCode 开源社区

centOS 8 使用dnf安装Docker

DNF是什么？CentOS 8使用YUM软件包管理器版本v4.0.4。现在，该版本使用DNF(已删除YUM)。DNF是软件包管理器。它会在Linux发行版上安装，执行更新并删除软件包。使用DNF安装Docker跳过具有损坏依赖性的程序包一个有效的解决方案是使您的CentOS 8系统使用以下--nobest命令安装最符合条件的版本：sudo dnf install docker...

avatar GitCode 开源社区

定时同步数据库表(mysql+linux+crontab)

sync.sh里面的参数需要改变，ip/username/password/database/tablesync.sh#!/bin/sh# Please change the IP and password of the data source db.# Then change the table name.filename=/home/nington/db/$(date +%Y-%m

avatar GitCode 开源社区